What do you get if you mix Glatt and Snö? Glö. Combining the fun part (snow foaming) and the part we all crave (beads) into one process. To be used after pre-wash and contact wash stage. Layer on the foam like you would at the beginning, but rather than watching the dirt dribble away you'll watch (and hear) the foam crackle and disperse leaving your paintwork and glass looking unbelievably glossy and full of tall and proud beads. Rinse again and towel dry. The car will be glowing.
Apply it via a professional snow foam cannon with a pressure washer capable of 130bar or more for best results. You probably won't use all the mixture on a single car. At Stjärnagloss we reckon a litre of concentrate is good for 20-40 protective layers.
IMPORTANT - you must rinse out your snow foam cannon after using Glö, all hydrophobic/sealant snow foams can potentially gum up the snow foam cannon gauze/internals and prevent it working properly in the future. After applying Glö, simply run a litre of pure water through the snow foam lance to flush it through. Do this every time. We cannot accept liability for snow foam cannons that fail to perform properly after this product has been applied. If your snow foam cannon fails, new gauzes and lance cleaning/disassembly tips can be found online.
Application: Apply Glö via a professional snow foam cannon using a pressure washer with at least 130bar for best results. If using a lower-powered washer, a stronger mix may be necessary. We recommend 100ml in a litre lance flask initially as a starting dilution but the product can be used at higher or lower concentrations.
Coverage: Cover the car uniformly in foam but do not allow the foam to dry out; never apply to hot panels.
Rinse: Allow the foam to dwell for a short time, then rinse thoroughly with water.
Maintenance: You MUST rinse out your snow foam cannon after using Glö, all sealant snow foams can gum up the snow foam cannon gauze/internals and prevent them working properly in the future. After applying Glö, simply run a litre of pure water through the snow foam lance to flush it through. Do this every time. We cannot accept liability for snow foam cannons that fail to perform properly after this product has been applied. If your snow foam cannon fails, new gauzes and lance cleaning/disassembly tips can be found online.
Mixing Instructions
1L Bottle: 50-100ml. Good for creating up to 20+ litres of snow foam mixture, enough for 30-40 car washes.
What do you get if you mix Glatt and Snö? Glö. Combining the fun part (snow foaming) and the part we all crave (beads) into one process. To be used after pre-wash and contact wash stage. Layer on the foam like you would at the beginning, but rather than watching the dirt dribble away you'll watch (and hear) the foam crackle and disperse leaving your paintwork and glass looking unbelievably glossy and full of tall and proud beads. Rinse again and towel dry. The car will be glowing.
Apply it via a professional snow foam cannon with a pressure washer capable of 130bar or more for best results. You probably won't use all the mixture on a single car. At Stjärnagloss we reckon a litre of concentrate is good for 20-40 protective layers.
IMPORTANT - you must rinse out your snow foam cannon after using Glö, all hydrophobic/sealant snow foams can potentially gum up the snow foam cannon gauze/internals and prevent it working properly in the future. After applying Glö, simply run a litre of pure water through the snow foam lance to flush it through. Do this every time. We cannot accept liability for snow foam cannons that fail to perform properly after this product has been applied. If your snow foam cannon fails, new gauzes and lance cleaning/disassembly tips can be found online.
Application: Apply Glö via a professional snow foam cannon using a pressure washer with at least 130bar for best results. If using a lower-powered washer, a stronger mix may be necessary. We recommend 100ml in a litre lance flask initially as a starting dilution but the product can be used at higher or lower concentrations.
Coverage: Cover the car uniformly in foam but do not allow the foam to dry out; never apply to hot panels.
Rinse: Allow the foam to dwell for a short time, then rinse thoroughly with water.
Maintenance: You MUST rinse out your snow foam cannon after using Glö, all sealant snow foams can gum up the snow foam cannon gauze/internals and prevent them working properly in the future. After applying Glö, simply run a litre of pure water through the snow foam lance to flush it through. Do this every time. We cannot accept liability for snow foam cannons that fail to perform properly after this product has been applied. If your snow foam cannon fails, new gauzes and lance cleaning/disassembly tips can be found online.
Mixing Instructions
1L Bottle: 50-100ml. Good for creating up to 20+ litres of snow foam mixture, enough for 30-40 car washes.
FREE SHIPPING OVER £60
UK Mainland Only
Royal Mail Tracked 24 & 48 Available
FREE SHIPPING OVER £60
UK Mainland Only
Royal Mail Tracked 24 & 48 Available
Stjarnagloss
Stjarnagloss Glö Hydrophobic Snow Foam 1L
Stjarnagloss Glö Hydrophobic Snow Foam 1L
Couldn't load pickup availability
Share
